Looking for a way to jazz up your wall artwork? Check out producing your personal Do-it-yourself acrylic frames for personalized 3D artwork. This article will walk you by just how I made these in my household.
If you are seeking for a custom way to body your pics or artwork to make it stand out from the wall, these Diy acrylic frames are the excellent issue.
I landed on these frames since I essential a minimal something to include a little further pizzazz to my toilet wall. 
We resolved to integrate my partner&rsquos like of golf into the combine by printing pictures he took of PGA golfing courses he&rsquos played in black and white.
I like when art is a discussion piece, so this was the great addition to the rest room wall.
To make it truly stand out, I produced these Do it yourself acrylic frames for each and every of the pics.
Below are the measures I took&hellip 
Table OF CONTENTS
- 1. Get your components.
- 2. Tape every aspect of every single corner.
- 3. Mark wherever you want to drill your holes.
- four. Drill your holes.
- five. Use your glue dots to protected your shots to the body.
- 6. go to this web-site on the wall wherever you prepare to cling it.
- 7. Use your punch resource to mark the whole on the wall.
- 8. Drill your holes in the wall.
- nine. Screw the standoffs into the wall.
- ten. Connect your body to the standoffs.
- 11. Revel in the completed products!
Disclaimer: This article does include things like affiliate back links for your ease. This is at NO further charge to you but earns me a small fee. To go through far more, verify out our disclosure coverage.
one. Collect YOUR Materials.
To start with items very first, obtain all your components. All resources for almost everything I used are connected below. I also bundled a listing with links of what we utilised to hang the frames, way too. 
FOR Generating THE Do it yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (1 for the measurement of the opening of your standoffs and one for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Instrument (I employed a Sharpie)
FOR HANGING THE Do-it-yourself ACRYLIC FRAMES:
- Pencil
- Handheld Level
- Punch
- Screwdriver
two. TAPE Each and every Side OF Every single CORNER.
Plexiglass/acrylic is extremely sensitive.
Mainly because of this, you have to be really very careful when you are drilling the holes.
Inserting a piece of painter&rsquos tape on both side where by you prepare to drill your gap will aid maintain the acrylic sheet from breaking or cracking when you drill.
I also stored the protecting include on every single aspect of the piece, way too.
3. MARK The place YOU WANT TO DRILL YOUR HOLES.
Once you have put the painter&rsquos tape on all four sides (or nevertheless lots of areas you plan to drill a hole), you can put a mark of where you want to drill your hole.
I drilled my holes one&Prime in from each and every edge as you can see from the photo previously mentioned.
four. DRILL YOUR HOLES.
In advance of really drilling, double and triple check that your marks are amount both horizontally and vertically.
You&rsquoll want to have these stage for when you hold them. 
The drill little bit you choose must be big sufficient to let the standoff to suit within the hole.
I would do a exam operate on a piece of scrap product to make confident it is significant adequate. 
When you are specified that the marking are amount and the little bit is big more than enough, you want to begin drilling.
In this article is a superior movie to observe if you would like a demonstration on how to drill via acrylic.
You want to use about fifty percent power when you are drilling.
Slow and continuous. If you go to rapidly, the acrylic will crack, so take your time.
As you drill you should really see spirals of the acrylic gradually being taken off. 
Repeat the drilling for each gap you need.
five. USE YOUR GLUE DOTS TO Protected YOUR Pics TO THE Frame.
Once your holes are produced, you can include your photo to the piece of acrylic/frame.
The key here is to all over again, make positive your image is stage right before you fully protected it to the body.
The glue dots are incredibly sticky and don&rsquot make it possible for for a good deal of wiggle room, so it may well be a good plan to line up a piece of lined paper driving the frame to assistance you line the edges of your image.
Regardless of what trick is effective for you to make certain the image gets glued to the body level will do. 
6. MARK THE Full ON THE WALL The place YOU Strategy TO Dangle IT.
As you commence to dangle, mark your holes on the wall, but make certain your frame is stage.
If you calculated correctly in the step in advance of drilling, the holes on your frame must now be amount.
If you are hanging extra than just one body like I did, make confident just about every frame is degree in your grid, as well. 
seven. USE YOUR PUNCH Software TO MARK THE Entire ON THE WALL.
I love this tool so considerably for the reason that it gets your gap commenced and makes it possible for your drill to continue to be in put when you start off drilling.
If you don&rsquot have one particular, I highly suggest it!
8. DRILL YOUR HOLES IN THE WALL.
Be absolutely sure to use a bit that fits the screws that came along with your standoffs.
This will most probable be a smaller little bit than the one you used on the frames.
I also utilised a stud finder to see if I required drywall anchors, but for the reason that these frames are not that weighty, you could probably do without having them.
9. SCREW THE STANDOFFS INTO THE WALL.
As soon as you order your standoffs, you&rsquoll see how they function.
In purchase for the image to &ldquostand off&rdquo the wall, you have to protected the standoff with the provided screw just before attaching the image to the standoffs.
As you can see from the photo, earning confident almost everything is degree and measured effectively is super essential. 
ten. Connect YOUR Body TO THE STANDOFFS.
The moment you&rsquove hooked up the standoffs, it&rsquos time to attach the photos!
Line up the standoffs with your drilled holes and safe the standoffs.
If all goes well, everything will line up properly and be prepared to go!
If you are like my father and I, you&rsquoll arrive across at minimum 1 that doesn&rsquot line up flawlessly.
For this, we cheated a very little bit and secured the standoff to the frame and employed a glue dot to safe it to the wall, so it didn&rsquot shift.
We only experienced to do this for two corners of two frames, but don&rsquot get worried if you mess up a person&hellip We&rsquove been there! 
eleven. REVEL IN THE Completed Product!
Now it&rsquos time to take pleasure in your work!
We did a grid of nine whole images which was a huge undertaking with all the measuring, but I&rsquom in like with how it turned out.
Permit me know in the opinions what you believe of the concluded products!